gulikit analog joystick steam deck lcd type ab hall effect Pri | Shop The World
From USA
NewGuliKit
GuliKit Analog Joystick For Steam Deck LCD (Type A&B), Hall Effect No Drift Electromagnetic Thumbstick Replacement, No Soldering, One-Key Calibration, Right & Left Repair Kit with Caps(Not Fit OLED)
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•1. Steam Deck Joystick Upgrade: The repair replacement is designed with the exact same dimensions as the original joystick. Toggle the button on the back to choose the correct type.(Settings →System→Steam Deck Controller ID, MEDA is Type A, MHDA is Type B).Featuring Hall Effect technology, they provide enhanced anti-drift capabilities, smoother operation, touch-sensing functionality, and a significantly extended lifespan.
•2.No-Soldering Required: Our analog joystick replacement eliminates soldering hassle, because it maintains the same size and interface as the original parts for easy installation, and comes with stick cap to keep the same touch sense functionality. Just align and tighten the screws to fix it—no special tools or soldering skills needed.
•3.One-Button Calibration: A. Move the joystick to the symmetrical position of the central point. B. Press the tiny calibration button on the board ( as marked on the picture). C. Release the joystick. D. Calibration is successfully completed when you see the joystick return to the center position.
•4.Reduce the Dead Zone: Minimize controller dead zones for enhanced precision by adjusting settings, potentially reaching a zero dead zone. This customization allows for more responsive input, significantly reducing the factory default's larger dead zones, which can lead to stick drift and imprecise movements.
•5.Warm Tips: It's needed to recalibrate before securing the back cover. It is normal that the joystick may not return to center each time under no dead zone mode. In case of stuck joystick issue, the stick cap that comes pre-installed becomes loose during shipping, just press the cap vertically down to fix it. If you need help, don't hesitate to contact us and we'll reply within 24 hours.
From USA
